1) The cylinder body is made of extruded aluminum alloy and has undergone hard oxidation treatment, so the surface texture is hard and the wear resistance is strong.
2) Compact double-piston rack structure, precise meshing, stable transmission, symmetrical installation position, and constant output torque.
3) The F4 guide ring is installed in the moving parts of the piston, rack and output shaft, which has low friction, long life and avoids metal-to-metal contact.
4) The cylinder block, end cover, output shaft, spring and fasteners are all treated with anti-corrosion treatment.
5) The spring of a single pneumatic actuator is installed after preloading, which is safe and convenient to disassemble.
6) The At32 pneumatic actuator can adjust the two-way travel of 0 degrees and 90 degrees plus or minus 5 degrees in the fully open and fully closed positions.
7) The installation and connection dimensions comply with ISO5211, din3337, VD1/vde3845, and Namur standards, ensuring the interchangeability of at32 pneumatic actuators and facilitating the installation of solenoid valves, limit switches and other accessories.
8) The installation and connection holes of the output shaft are available in various shapes (square hole, shaft key hole, flat hole). 9) The appearance is beautiful and exquisite, light in weight, and the structure is waterproof and sealed.
10) There are room temperature type, high temperature type and low temperature type. Nitrile rubber is used for room temperature, Viton or silicone rubber is used for high or low temperature.
